1 silicon double balanced hmic mixer 1700 - 2300 mhz m/a-com products rev. v3 MA4EX190H1-1225T advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under develop- ment. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ordering information features ? low cost miniature plastic package ? 6.6 db typical conver sion loss at 1900 mhz ? 6.7 db typical conver sion loss at 2200 mhz ? +13 to +17 dbm lo drive ? hmic ? process ? silicon high barrier schottky diodes ? dc - 500 mhz if bandwidth ? rohs* compliant with 260 c. reflow capability ? 100% matte tin plating description and applications m/a-com?s ma4ex190h1-1 225t is a silicon mono- lithic 1700-2300 mhz double balanced mixer in a low cost miniature surface mount sot-25 package. the die uses m/a-com?s unique hmic tm silicon/ glass process to achieve low loss passive elements while retaining the advantages of low barrier silicon schottky diodes. these mixers are well suited for high volume wireless and cellular applications where small size and repeatability are required. typical applications include frequency conversion, modulation, and demodulation for receivers and transmitters in both portable cellular and base station applications. sot-25 package outline (topview) pin configuration pin function pin function 1 rf 4 gnd 2 gnd 5 if 3 lo 3 2 1 4 5 absolute maximum ratings 1 parameter maximum ratings operating temperature -40c to +85c storage temperature -65c to 150c incident lo power +20 dbm incident rf power +20 dbm solder temperature +260c 1. exceeding these limits may cause permanent damage. schematic standard part number package MA4EX190H1-1225T tape and reel mamx-000190-000smb sample test board lo if rf *restrictions on hazardous substances, european union directive 2002/95/ec.
2 silicon double balanced hmic mixer 1700 - 2300 mhz m/a-com products rev. v3 MA4EX190H1-1225T advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under develop- ment. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. electrical specificat ions @ +25 c parameter frequency range test conditions units min. typ. max. conversion loss 1900 mhz 1700-2300 mhz lo drive = +15 dbm rf = -10 dbm, if = 60 mhz db db 6.6 6.7 7.0 8.0 l - r isolation 1900 mhz 1700-2300 mhz lo drive = +15 dbm rf level = -10 dbm db db 30.0 30.0 l - i isolation 1900 mhz 1700-2300 mhz lo drive = +15 dbm rf level = -10 dbm db db 28.0 28.0 r - i isolation 1900 mhz 1700-2300 mhz lo drive = +15 dbm rf level = -10 dbm db db 23.0 20.0 rf vswr 1900 mhz 1700-2300 mhz lo drive = +15 dbm rf level = -10 dbm 1.10:1 1.20:1 if vswr dc - 500 mhz lo drive = +15 dbm rf level = -10 dbm 1.40:1 - input ip3 1900 mhz 1850-2300 mhz lo drive = +15 dbm if = 60 mhz dbm dbm 23 23 26.0 26.0 input 1 db compression 1900 mhz 1700-2300 mhz lo drive = +17 dbm if = 60 mhz dbm dbm 10.5 10.5 - - if 1 db bandwidth mhz 0 500 - typical performance curves (lo drive = +15 dbm, rf = -10 dbm, if = 60 mhz) vswr isolation conversion loss input ip3 & 1db compression point -8.5 -8 -7.5 -7 -6.5 -6 -5.5 -5 1650 1720 1790 1860 1930 2000 2070 2140 2210 2280 2350 frequency (mhz) loss (db) plo = 17dbm plo = 13dbm plo = 15dbm 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200 2250 2300 2350 50 100 150 200 250 300 350 400 450 500 frequency (mhz) vswr i port r port -35 -30 -25 -20 -15 -10 -5 0 1650 1750 1850 1950 2050 2150 2250 2350 frequency (mhz) isolation(db) r-i l-i l-r 0 5 10 15 20 25 30 35 1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200 2250 2300 frequency (mhz) ip3 (dbm) 1db com p ression pl o = 17 d bm plo = 15dbm
3 silicon double balanced hmic mixer 1700 - 2300 mhz m/a-com products rev. v3 MA4EX190H1-1225T advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under develop- ment. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. sot-25 dimensions case style - sot-25 dim inches millimeters min. max. min. max. a .106 .122 2.70 3.10 b .100 .118 2.54 3.00 c ? .051 ? 1.30 d .063 ref. 1.60 ref. e .032 .043 .80 1.10 f .014 .020 .35 .50 g .003 ? .08 ? h .000 .006 .00 .15 j .018 ref. .45 ref. 2. leads coplanarity should be 0.003 (0.08) max.
|
